How to install Windows from USB or Pendrive

In this tutorial We lean about How to install Windows 7 from USB Or How to create bootable usb windows 7 also Learn  how to load the Windows installation on to your USB flash drive and make it bootable just like the DVD.

Tools Required to Load Windows 7 Installation Files:

USB flash drive with a minimum capacity of 4 GB.
Windows 7 set-up DVD.

Step-1

Plug in Usb Flash Drive .
Open the command prompt (CMD). If you are using Windows 7/Vista then open it with administrator rights.

Step-2

In the command prompt, type in the following command

Diskpart

LIST DISK

This will show you a list of  available disks on your system. Disk 0 is usually the hard disk. Disk 5 is the USB drive (this can be a different one in your case).

SELECT DISK 5

Step-3

Now Enter these Commands One by One   

CLEAN

CREATE PARTITION PRIMARY

SELECT PARTITION 1

ACTIVE

FORMAT FS=NTFS QUICK

ASSIGN

EXIT

Minimize the command prompt and proceed to the next step.

Step-4

Insert the Windows 7/Vista installation disc and note down the “drive letter” of your DVD drive. In my case, it is “H:”. Now type the following list of commands

H: CD BOOT

CD BOOT

BOOTSECT.EXE /NT60 M: (NOTE: M: is your USB drive letter)

EXIT

Step-5

Copy the contents of your Windows 7/Vista installation disk into the USB flash drive.

That’s it! Your USB stick is now ready to boot and install the Windows 7 for you. Don’t forget to enable the “USB Boot” option and change the “boot priority to USB device from hard disk” in your BIOS settings.

Share on Google Plus

About Gamer Goals

is a Author at Hacking Tides. Hacking tides is place to Learn About Hacking and related to Hacking Topics.Giving information about Online Earning and Windows Hacking Tricks.